Swegon ESENSA PX TOP Installation Instructions Manual
Hide thumbs
Also See for ESENSA PX TOP:
- Installation instructions manual (42 pages) ,
- Operation & maintenance instructions manual (20 pages) ,
- Manual (12 pages)
Subscribe to Our Youtube Channel
Related Manuals for Swegon ESENSA PX TOP
Summary of Contents for Swegon ESENSA PX TOP
- Page 1 Installation instructions for the product range ESENSA PX TOP/ RX TOP Consult the latest version of this manual on our website: www.swegon.com...
-
Page 2: Table Of Contents
3. General installation ..... 9 EXTRACT AIR (2) SUPPLY AIR (4) 3.1 Duct connection .......9 3.2 Drain-pan (ESENSA PX TOP) ....10 3.3 Temperature sensor T5 .......11 4. Unit power supply and start-up..12 5. Main switch........ 12 6. Operation & commissioning manuals.12 7. -
Page 3: General
Any damages to the unit (or parts of it) due to a (some specific models are designed to be also placed outside) ESENSA PX TOP misuse cannot be considered subject to guarantee. and mounted horizontally on a flat and firm supporting surface (perfectly level floor)and this surface must be constructed All electrical work must be carried out by a qualified electrician. -
Page 4: Maintenance Area
GB.ESENSA.MI.231004 GB.ESENSA.MI.231004 2.3 Components ESENSA RX TOP ESENSA PX TOP 1. Main switch 2. Cable inlet 3. Integrated electrical cabinet 4. Supply air fan 5. Extract air fan 6. Supply air filter(mini-pleated) 7. Extract air filter (mini-pleated) 8. High efficiency plate heat exchanger 9. -
Page 5: Detailed Components
Max 300 mm between each self-drilling screw H. Power supply/switch Q. Hydraulics connection membrane (not provided) I1/I2. Membrane entry grommet (supply cable) R1/R2. Pressure tappings www.swegon.com www.swegon.com We reserve the right to alter specifications. We reserve the right to alter specifications. -
Page 6: Drain-Pan (Esensa Px Top)
GB.ESENSA.MI.231004 GB.ESENSA.MI.231004 3.2 Drain-pan (ESENSA PX TOP) 3.3 Temperature sensor T5 Condensation water drainage for indoor installation. Remark : The standard accessories are inside the delivered device with dedicated instructions. Screw the siphon pipe to the drain pan tank from below the ventilation unit and make sure that the seal is present. -
Page 7: Unit Power Supply And Start-Up
Click here Click here external watercoil (electrical) Control ESENSA PX TOP Open the electrical cabinet panel, pass the cable through a cable gland and connect the wires according to the wiring Integrated SAT I/O TAC6 diagrams below (single-phase and three-phase). -
Page 8: Main Board
RED LED ON = ALARM RJ4 = RJ12 connector for Modbus Pressure CA mode on ex- haust flow and defrost detecting (option - prewired) www.swegon.com www.swegon.com We reserve the right to alter specifications. We reserve the right to alter specifications. - Page 9 GB.ESENSA.MI.231004 The document was originally written in English. www.swegon.com We reserve the right to alter specifications.
Need help?
Do you have a question about the ESENSA PX TOP and is the answer not in the manual?
Questions and answers