Advantech ICR-4401 Hardware Manual
Lan industrial router
Hide thumbs
Also See for ICR-4401:
- User manual (47 pages) ,
- Start manual (8 pages) ,
- Start manual (8 pages)
Related Manuals for Advantech ICR-4401
Summary of Contents for Advantech ICR-4401
- Page 1 Hardware Manual LAN Industrial Router ICR-4401 Advantech Czech s.r.o., Sokolska 71, 562 04 Usti nad Orlici, Czech Republic Document No. MAN-0064-EN, revision from 7th March, 2024.
- Page 2 © 2024 Advantech Czech s.r.o. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photography, recording, or any information storage and retrieval system without written consent. Information in this manual is subject to change without notice, and it does not represent a commitment on the part of Advantech.
- Page 3 Used symbols Danger – Information regarding user safety or potential damage to the router. Attention – Problems that can arise in specific situations. Information – Useful tips or information of special interest.
-
Page 4: Table Of Contents
Contents 1. Product Overview 1.1 Product Introduction ......... 1.2 Hardware Overview . - Page 5 Appendix D: Related Documents...
- Page 6 List of Figures Router Hardware Overview: Front View ......Router Hardware Overview: Rear View .
- Page 7 List of Tables Router Hardware Overview: Front View ......Router Hardware Overview: Rear View .
-
Page 8: Product Overview
1. Product Overview 1.1 Product Introduction The ICR-4401 stands as a LAN Router and a powerful edge computing gateway targeted at the global market. It is optimally designed for high-demand IoT applications across various sectors, such as industrial routers and gateways, digital signage, and industrial PCs and tablets. -
Page 9: Hardware Overview
Chap- for I/O parameters, and Chapter for serial inter- face parameters. WIFI1 RP-SMA Connectors for the WiFi antennas. See Chapter female more information and Chapter for WiFi parameters. Table 1: Router Hardware Overview: Front View ICR-4401 Hardware Manual... -
Page 10: Router Hardware Overview: Rear View
Pay attention to proper grounding; see Chapter 2.5. screw microSD slot microSD MicroSD card slot; see Chapter 2.10. Wall clips — Wall mounting clips, included as standard accessories; see Chapter 1.8. Table 2: Router Hardware Overview: Rear View ICR-4401 Hardware Manual... -
Page 11: Order Codes
Initial version (revision number not printed on the labels). New design of the mainboard and PoE board; see PCN-2023-03 for details. Table 4: HW Revisions History This product has no E8 certification and has a limited operating temperature range of -40 C to +60 C. ICR-4401 Hardware Manual... -
Page 12: Package Contents
2-pin terminal block for power supply 1 pcs (deployed on the router) 14-pin terminal block for RS232, RS485, CAN BUS, and I/O 1 pcs (deployed on the router) Printed Quick Start Guide Leaflet 1 pcs Table 5: Contents of Package ICR-4401 Hardware Manual... -
Page 13: Product Dimensions
For the dimensions of the router see the figures below. Note that all sizes are measured in millimeters. Variant with Wall Mounting Clip Figure 3: Router Dimensions – Front, Top and Right view with Wall Mounting holder ICR-4401 Hardware Manual... -
Page 14: Router Dimensions - Front, Top And Right View With Din Holder
1. Product Overview 1.6 Product Dimensions Variant with DIN Rail Clip Figure 4: Router Dimensions – Front, Top and Right view with DIN holder ICR-4401 Hardware Manual... -
Page 15: Mounting Recommendations
• Data cables must not be bundled with mains voltage cables (230 V/50 Hz or 120 V/60 Hz). • Ensure sufficient space is left between each connector for cable handling. • For proper router functionality, use an earth-bonding distribution frame to ground the grounding screw (refer to Chapter 2.5). ICR-4401 Hardware Manual... -
Page 16: Wall Mounting
Each clip features two holes with a diameter of 5 millimeters for screw placement. For precise mounting dimensions, refer to Figure in Chapter 1.6. When attaching the wall mounting clip, tighten the screws with a maximum torque of 0.4 Nm. Figure 5: Rotated Wall Mounting Clips ICR-4401 Hardware Manual... -
Page 17: Din Rail Mounting
To remove the router from the DIN rail, lightly push down on the router to disengage the bottom part of the DIN rail clip from the rail. Then, pivot the bottom part of the router away from the DIN rail, as demonstrated in Figure 7. Figure 7: Removing Router from the DIN Rail ICR-4401 Hardware Manual... -
Page 18: Product Label
1. Product Overview 1.10 Product Label 1.10 Product Label The figure below shows an example of the product labels with all the information printed on them. Figure 8: Product Label ICR-4401 Hardware Manual... -
Page 19: Hardware Functionality
All four ETH0 ports can be used for PoE PSE if the router is equipped with this feature. For more information about the PoE, see Chapter 2.3; for technical parameters, see Chapter 4.7. The isolation barrier of the Ethernet ports against the ground is 1500 V. ICR-4401 Hardware Manual... -
Page 20: Power Over Ethernet (Poe) Pse
To monitor the current PoE state, navigate to the General status page in the GUI. When PoE is enabled and an external device is being powered, you can access information about current, voltage, power, and power class here. ICR-4401 Hardware Manual... -
Page 21: Poe Pse Parameters
Table 7: PoE PSE Parameters PoE Power Budget Examples Example #1 This example is for the Advantech RPS-ICR4-WR2-PSE power supply, which can supply a power of 65 W. We will use 15 W as the maximum router power consumption; see Chapter efchap:BasicParams. -
Page 22: Sfp Cage
Figure 11: SFP Module Installation See Table for a list of successfully tested SFP modules on the product. Model Manufacturer SFP-GSM-20K Advantech ML-S+31Dout-10 MaxLink S-3553LC20D MikroTik SFP-PLUS-LR10-HPE Hewlett Packard SFP-TXCIS TXM431-LR(UN) TP-Link UF-RJ45-1G Ubiquiti Table 8: Tested SFP Modules ICR-4401 Hardware Manual... -
Page 23: Power Supply
All metal parts, including the box, are interconnected with the negative pole of the power supply (common pole). If recommended for the installation environment, protect the router by properly grounding it using the grounding screw, as depicted in Figure 13. The maximum tightening torque for the grounding screw is 1 Nm. ICR-4401 Hardware Manual... - Page 24 2. Hardware Functionality 2.5 Power Supply Figure 13: Position of the Grounding Screw ICR-4401 Hardware Manual...
-
Page 25: Low Power Mode
BIN1 input or after a predefined period of time. To put the router into LPM mode, you can use the lpm command; for more information, refer to the Commands and Scripts application note. ICR-4401 Hardware Manual... -
Page 26: I/O Port Interfaces
Signal mark Description BIN0 The first digital input BOUT0 The first digital output BIN1 The second digital input BOUT1 The second digital output Table 10: Connection of I/O Ports Figure 15: Functional Scheme of the Digital Interface ICR-4401 Hardware Manual... -
Page 27: Serial Interfaces
Transmit Data Table 11: Connection of RS232 Signal mark Description CAN_H CAN High CAN_L CAN Low Table 12: Connection of CAN Bus Signal mark Description B (+) In/Out A (-) In/Out Ground Table 13: Connection of RS485 ICR-4401 Hardware Manual... -
Page 28: Usb Port
Positive pole of 5 V DC supply voltage, 0.5 A USB data - USB data signal – negative pole Input/Output USB data + USB data signal – positive pole Input/Output Negative pole of DC supply voltage Table 14: USB Connector Pinout ICR-4401 Hardware Manual... -
Page 29: Microsd Card Reader
• To mount the card to the mnt directory, use the mount command: mount /dev/mmcblk0p1 /mnt For more information about the commands for creating, mounting, checking, and unmounting a file system on a microSD card, refer to the application note for the Ext4 Filesystem Utilities router app. ICR-4401 Hardware Manual... -
Page 30: Led Status Indication
Selected 1 Gbps bit rate. ETH1 Green Selected 100/10 Mbps bit rate. ETH0 Yellow The network cable is connected. ETH1 Yellow Brief off blinks Data transmission. Yellow The network cable is not connected. Table 16: LED Status Indication ICR-4401 Hardware Manual... -
Page 31: Reset Functions
RST button for at least 10 seconds. This action will reset the router’s configuration to the default settings. Use a narrow screwdriver or any small tool to press the RST button. Figure 19: Resetting the Router ICR-4401 Hardware Manual... -
Page 32: First Use
All routers have the WebAccess/DMP client pre-installed by default. The activated client periodically uploads router identifiers and configuration to the WebAccess/DMP server. See the configuration manual [1], chapter Basic Information WebAccess/DMP Configuration, for more information. If the router’s label lacks a unique password, use the password root . ICR-4401 Hardware Manual... -
Page 33: Technical Parameters
Models having ICR-4401W1x order codes have an operating temperature range of -40 C to +60 C. Maximal power consumption for model with the PoE PSE (for maximal power load on all ETH0 ports). For device equipped with the PoE PSE. ICR-4401 Hardware Manual... -
Page 34: Standards And Regulations
EN 60068-2-2, EN 60068-2-1, EN 60068-2-14, EN 60068-2-30 Transportation E-Mark (E8), homologation number: 10R - 06 11459 National CE, UKCA compliant Environmental REACH, RoHS3 and WEEE compliant Table 18: Standards and Regulations Models having ICR-4401W1x order codes have no E8 certification. ICR-4401 Hardware Manual... -
Page 35: Type Tests And Environmental Conditions
Vibration, broad- EN 60068-2-64 Spectrum A.3 cat 1, breakpoints A.6 cat 1 band random Shock EN 60068-2-27 50 m/s , 11 ms, half sine, 10 in each dir. Table 19: Type Tests and Environmental Conditions ICR-4401 Hardware Manual... -
Page 36: Parameters Of Wifi
Security – Encryption WEP, TKIP, AES Security – EAP Types EAP–FAST, EAP–TLS, EAP–TTLS, PEAP–GTC, PEAP–MSCHAPv2, PEAP–TLS, LEAP TX Power (per chain) Max. 21 dBm @ 2.4 GHz Max. 18 dBm @ 5 GHz Table 20: Technical Parameters of WiFi ICR-4401 Hardware Manual... -
Page 37: Parameters Of I/O Ports
Flow Control none, hardware. Table 22: Parameters of Serial Interfaces The digital status returned by the io get shell command. The digital status returned by the status ports shell command and displayed on the General Status page. ICR-4401 Hardware Manual... -
Page 38: Parameters Of Poe
• 838 MB for Router Apps • 512 MB for customer data • The remaining space is reserved for the system. RAM size 1 024 MB Watchdog HW watchdog Battery backup RTC Trusted Platform Module (TPM) 2.0 Table 23: System Configuration ICR-4401 Hardware Manual... -
Page 39: Appendix A: Troubleshooting
• Check the "System Log" page for error messages. IPSec tunnel establishes but the communication does not run. • Probably there are bad routing rules defined in the connected devices, or the default gateway. Serial communication is not working. ICR-4401 Hardware Manual... - Page 40 Web interface in "Configuration" section, "Services", "SSH". Then connect with any SSH client on port 22 of the router. User and password is the same as for the Web interface. Telnet on v2 routers can be enabled here: "Configuration" section, "Services", "Telnet". ICR-4401 Hardware Manual...
- Page 41 +1-800-346-3119 (Monday – Friday, 7 a.m. to 5:30 p.m. CST) Fax: +1-815-433-5109 E-mail: support.iiot.ana@advantech.com Web: www.advantech.com Customer Support for Asia Phone: +886-2-2792-7818 #1299 (Monday – Friday, 9 a.m. to 5:30 p.m. UTC+8) Fax: +886-2-2794-7327 E-mail: icg.support@advantech.com.tw Web: www.advantech.com ICR-4401 Hardware Manual...
- Page 42 At the end of it’s life this pro- duct MUST NOT be mixed with other commercial waste for disposal. The device contains a battery. Remove the battery from the device before disposal. The battery in the device needs to be disposed of apart accordingly. Check the terms and conditions of your supplier for disposal information. ICR-4401 Hardware Manual...
- Page 43 Appendix D: Related Documents ICR-4400 Configuration Manual [EP] Product-related documents and applications can be obtained on Engineering Portal at https://icr.advantech.com/download address. ICR-4401 Hardware Manual...
- Page 44 We, Advantech Czech s.r.o., declare that the radio equipment narrated in this user’s man- ual complies with Directive 2014/53/EU (WiFi version) and with the essential requirements and other relevant provisions of Directives 2014/30/EU and 2014/35/EU (non-WiFi ver- sion). We, Advantech Czech s.r.o., declare that the radio equipment narrated in this user’s man- ual complies with Radio Equipment Regulations 2017 (S.I.