1. Product Overview
1.8 Wall Mounting
The wall mounting clip is included as a standard accessory with the router.
The router can be affixed to a wall or another surface using the wall mounting clips. Two wall mounting
clips are pre-assembled to the router during production and need to be rotated as shown in Figure 5.
Each clip features two holes with a diameter of 5 millimeters for screw placement. For precise mounting
dimensions, refer to Figure
When attaching the wall mounting clip, tighten the screws with a maximum torque of 0.4 Nm.
ICR-4401 Hardware Manual
3
in Chapter 1.6.
Figure 5: Rotated Wall Mounting Clips
1.8 Wall Mounting
9