Sfp Cage - Advantech ICR-4401 Hardware Manual

2. Hardware Functionality

2.4 SFP Cage

A hot-pluggable (SFP) network interface module with a speed of up to 10 Gbps can be settled into the
ETH2 SFP cage.
Installing an SFP Module
To install an SFP module, please refer to Figure
• If the SFP module is equipped with a bale clasp, ensure it is closed before inserting the SFP module.
• Hold the SFP module with the hardware label facing up.
• Gently insert the SFP module into the ETH2 slot and push it until it securely snaps into place.
See Table 8 for a list of successfully tested SFP modules on the product.
ICR-4401 Hardware Manual
Figure 11: SFP Module Installation
Model
SFP-GSM-20K
ML-S+31Dout-10
S-3553LC20D
SFP-PLUS-LR10-HPE
SFP-TXCIS
TXM431-LR(UN)
UF-RJ45-1G
Table 8: Tested SFP Modules
11 and follow these steps:
Manufacturer
Advantech
MaxLink
MikroTik
Hewlett Packard
OEM
TP-Link
Ubiquiti
2.4 SFP Cage
15