Memory Operation On "Home" Channel Memories - Yaesu FT-817ND Operating Manual

M
EMORY
M O
EMORY
Four Special one-touch "Home" channels are available, for special frequencies you use
often. Either "simplex" or "split" frequency/mode data may be stored in the "Home" chan-
nel locations. Special "Home" channels are available for HF (any frequency between 1.8
and 29.7 MHz), 50 MHz, 144 MHz, and 430 MHz.
These memories may prove particularly useful for monitoring propagation beacons, provid-
ing one-touch recall of the beacon frequency for a quick check of band conditions.
HOME Channel Storage
1. Tune the desired frequency, and set the operating mode. If this is an FM channel, set up
any required CTCSS/DCS and repeater shift configurations.
2. Press the key momentarily, then rotate the
Function Row 2 [ MW, MC, TAG ] appears on the display.
( MW ) key momentarily to enter the "Memory Check" mode.
3. Press the
4. Press and hold in the
"Home" channel location. As usual, you will hear a double beep to confirm the success-
ful storage of the frequency data.
5. If you wish to store a "Split" frequency pair into the "Home" channel, store the Receive
frequency in steps 1 ~ 4 above. Now set the desired Transmit frequency.
6. Once more, press the
7. Press and hold in the microphone's PTT switch; while holding the PTT switch, again
press and hold the
the "Home" channel location.
HOME Channel Recall
1. Press the key momentarily to recall the Home Channel on the band group where
you currently are operating (HF, 50 MHz, 144 MHz, or 430 MHz). The "HOME" indica-
tion will appear on the display.
2. Press the key once more to return to the previously-used frequency (either a VFO
frequency or a memory channel).
48
O
PERATION
PERATION ON
key for one second. This stores the frequency data into the
( MW ) key momentarily.
key for one second. This stores the transmit frequency data into
"HOME" C
HANNEL
knob, as needed, until Operating
FT-817
M
EMORIES
Operating Manual