Tone Search Scanning - Yaesu FT-817ND Operating Manual

In operating situations where you don't know the CTCSS tone being used by another
station, you can command the radio to listen to the incoming signal and scan in search
of the tone being used.
To scan for the CTCSS tone in use:
1. Press the
ating Function Row 12 [ TCH, DCH ] appears on the display.
2. Press the
icon will appear on the display) and start scanning for the incoming CTCSS tone.
3. When the radio detects the correct tone, it will halt on that tone, and audio will be
allowed to pass.
4. Press and hold in the
will be stored as the "current" tone, so it may be used for memory storage pur-
poses, and you may now exit to normal operation.
FT-817 Operating Manual
T
RANSMITTER
FM T

Tone Search Scanning

key momentarily, then rotate the
( TCH ) key to activate CTCSS Encoder/Decoder; (the "
( TCH ) key for one second; the CTCSS tone detected
RANSMISSION
O
PERATION
knob, as needed, until Oper-
"
35