Yaesu FT-817ND Operating Manual page 16

F P
RONT
1 A/B
Press the
between VFO-A and VFO-B
on the display.
2 MW
Press and hold in the
for 1/2 second to transfer the
contents of the VFO into a
Memory register.
3 STO
Press the
the contents of the VFO into
the QMB (Quick Memory
Bank) register.
4 RPT
Press the
the direction of the uplink fre-
quency shift ("–," "+," or Sim-
plex) during FM repeater op-
eration.
Press and hold in the
for 1/2 second to recall Menu
#42 (for setting the shift fre-
quency offset).
5 SCN
Press the
scanning (in the direction of
frequencies).
6 SSM
Press the
the Spectrum Scope Monitor
feature.
Press and hold in the
for 1/2 second to recall Menu
#43 (for selecting the SSM
sweep mode).
7 IPO
Press the
the receiver preamplifier,
thereby activating Intercept
Point Optimization for im-
proved overload characteris-
tics.
The IPO feature does not
function on 144/430 MHz.
14
C
ANEL
Key
key to switch Press and hold in the
for ½ second to copy the con-
tents of VFO-A into the VFO-
B register, so that the two
VFOs' contents will be identi-
cal.
key Press the
nate the current Memory
channel to be "skipped" dur-
ing scanning.
key to store Press the
the QMB Memory.
key to select Press the
the transmit and receive fre-
quencies while working
through a repeater.
key
key to initiate Press the
the Priority Scan feature.
key to activate Press the
Smart Search
key
key to bypass Press the
the receiver front-end attenu-
ator, which will reduce all sig-
nals and noise by approxi-
mately 10 dB.
The ATT feature does not
function on 144/430 MHz.
ONTROL
Key
A=B
key
MC
key to desig-
RCL
key to recall
REV
key to reverse
PRI
key to activate
SCH
key to activate
operation.
ATT
key to engage
FT-817
& S
WITCHES
SPL
Press the key to activate
Split frequency operation be-
tween VFO-A and VFO-B.
TAG
Press the key to select
the display type (Frequency
or Alpha-numeric Tag) during
Memory operation.
PMS
Press the key to activate
the Programmable Memory
Scan feature.
TON
Press the key to activate
CTCSS or DCS operation.
Press and hold in the
for 1/2 second to recall Menu
#48 (for selecting the CTCSS
tone frequency).
DW
Press the key to activate
the Dual Watch system.
ART
Press the key to initiate
the Auto-Range Transponder
mode.
Press and hold in the
for 1/2 second to recall Menu
#09 (for selecting the ARTS
"Beep" option).
NAR
Press the key to activate
the "Narrow" filter mode in the
CW (optional YF-122C or YF-
122CN required) or SSB (op-
tional YF-122S required)
mode. On the FM mode, it
also selects the low-deviation
mode required for HF FM op-
eration on 29 MHz.
Press and hold in the
for 1/2 second to recall Menu
#38 (to Enable/Disable the
optional filter during installa-
tion).
Operating Manual
key
key
key