Receiver Accessories; If Shift - Yaesu FT-817ND Operating Manual

Hf/vhf/uhf all mode transceiver

Hide thumbs Also See for FT-817ND:

Table of Contents

ECEIVER

The receiver's IF SHIFT feature is an effective interference-reduction tool, which allows

you to shift the passband response higher or lower without changing the pitch of the incom-

ing signal.

1. Press the

switch for one second to acti-

vate the IF SHIFT feature. A "

" icon will appear at the right of the fre-

quency display to indicate the IF SHIFT's

current position.

2. Rotate the

or eliminate the interference.

3. To turn the IF SHIFT feature off, again press the

one second. The last setting of the IF SHIFT control will be

retained until you change it again.

4. If you wish to make a more permanent shift in the receiver's IF

passband, use Menu #54 (LSB) or #55 (USB) in the "Extended

Menu." This allows you to set up a higher or lower listening

pitch, if you prefer such as compared to the default passband

response. See page 68.

Engaging of the IF Shift feature does not disable the set-

ting of the Clarifier control. With the IF Shift activated,

press the

switch momentarily to switch to Clarifier operation.

CCESSORIES

", " ," or

knob, as needed, to reduce

switch for

FT-817

Operating Manual

Table of Contents

Show Quick Links

Table of Contents