Yaesu FT-817ND Operating Manual page 63
Hf/vhf/uhf all mode transceiver
Hide thumbs
Also See for FT-817ND:
- Operating manual (84 pages) ,
- Brochure & specs (4 pages) ,
- Technical supplement (111 pages)
Table of Contents
Advertisement
Menu Item 09 [ ARTS BEEP ]
Function: Select the ARTS beep mode.
Available Values: OFF/RANGE/ALL
Default: RANGE
OFF:
No alert beeps sound; you must look at the display to determine current ARTS
status.
RANGE: A high tone beep will sound when the transceiver first detects that you are within
range, and a low beep will sound when the other station goes out of range.
ALL:
A high tone beep will sound every time a polling transmission is received from the
other station, and a low beep will sound once when the other station goes out of
range.
Menu Item 10 [ BACKLIGHT ]
Function: Select the LCD lamp mode.
Available Values: OFF/ON/AUTO
Default: AUTO
OFF:
Disables the LCD lamp.
ON:
Illuminates the LCD lamp continuously.
AUTO: Illuminates the LCD lamp for five seconds when any key is pressed.
Menu Item 11 [ BATT-CHG ]
Function: Select the battery charging time.
Available Values: 6/8/10 h (hours)
Default: 8 h
Menu Item 12 [ BEEP FREQ ]
Function: Select the beep frequency
Available Values: 440/880 Hz
Default: 880 Hz
Menu Item 13 [ BEEP VOL ]
Function: Select the beep volume
Available Values: 0 ~ 100
Default: 50
Menu Item 14 [ CAT RATE ]
Function: Set the transceiver's circuitry for the CAT baud rate to be used.
Available Values: 4800/9600/38400 bps
Default: 4800 bps
FT-817
Operating Manual
M
O
ENU
PERATION
61
Hide quick links:
Advertisement
Table of Contents
