The Default One Touch Settings On Your Scanner - Xerox DocuMate 262i User Manual

Scanning

The Default One Touch Settings on Your Scanner

32
4. The scanner begins scanning. When the process finishes, the
scanned images appear in the Destination Application, just as if you
scanned with the Simplex or Duplex scanner buttons.
Based on the recommended install of PaperPort and the scanner driver,
your scanner is pre-configured to scan items for various basic tasks, such
as email or fax, then send the scanned image to an appropriate, pre-
selected Destination Application. The button names, such as PDF, eMail
or Fax, indicate the original factory settings for the Destination Application
assigned to a button.
You can change any of these settings. Please see "Configuring the One
Touch Buttons" on page 33 for instructions.
For example, the eMail button is set up to scan documents then
immediately attach them to a new eMail message in your default eMail
program. The email application will default to the email program specified
in the internet options of Internet Explorer.
A folder icon for a button, such as shown for Button 7, means that the
button is set up to archive the scanned item. This is a special pre-
configured Transfer to Storage option for your scanner. The scanner
sends the scanned image directly to a folder without opening the image
first in a Destination Application.
A question mark for a button means your computer does not have
appropriate software for the initial factory settings. In that case, you would
probably want to change the name and Destination Application to
something else.
If PaperPort, OmniPage or One Touch OmniPage is not installed, then the
options for sending to word processing applications such as Microsoft
Word will not be available.
The default page size in each configuration is based on the
NOTE:
location selected in your Windows setup.
DocuMate 262i Scanner User's Guide