Xerox DocuMate 262i User Manual page 78

DocuMate 262i Scanner User's Guide
2. Click the Properties button.
Your scanner has a built-in power saving feature that is set to power
down after 15 minutes of idle time. You can change the time before
the scanner powers down, from 1 minute to a maximum of 4 hours.
3. Click the arrows for the Lamp timeout setting and choose a time
setting.
To turn the lamp on and off manually without turning off power to the
scanner, click the Lamp On or Lamp Off buttons.
To return the scanner to its factory settings, click Reset Device.
See "Auto Scan from the Front Feed Tray" on page 28 for instructions
on using the Front Feed Scan Event: option.
4. Click OK to save the changes and close the dialog box.
Scanning
73