Editing Or Deleting Scan Configurations - Xerox DocuMate 162 User Manual

Xerox documate 162: user guide

Hide thumbs Also See for DocuMate 162:

Table of Contents

Scanning

Editing or Deleting Scan Configurations

Editing and deleting is normally for the configurations you create, not for

your scanner's pre-set configurations.

NOTE:

Your scanner comes with a number of configurations pre-set at

the factory. To ensure that your scanner will always have a set of

correct scan configurations, do not delete the pre-set configurations.

We also recommend that you keep those configurations locked so they

are not inadvertently deleted. That way, you will always have the

factory-settings available. If you do delete or edit them, and want to get

the factory pre-sets back again, you will need to uninstall then re-install

your scanner.

To edit or delete a scan configuration:

1. Open the One Touch Properties window.

2. Select the scan configuration you want to edit or delete.

•

To delete the configuration, click the Delete button.

•

To edit the configuration, click the Edit button.

Edit the settings and click OK.

3. Click OK to close the One Touch Properties window.

Select the scan

configuration to edit or

delete. It must be unlocked,

as indicated by not having a

lock displayed here.

DocuMate 162 Scanner User's Guide

Table of Contents