Xerox WorkCentre M24 System Administrator Manual page 68

6a4 - NetBIOS over IP Client/Server Printing
Step 6
...continued
NetBIOS over IP Client/Server Printing
Before You Start
1.
Obtain the Print Driver for your workstation's operating system. Drivers are available on one of the CD-
ROMs that came with your Printer. They are also typically available for downloading in self-extracting
Zip file format from the Internet at www.xerox.com.
2.
Print a Settings List as stated under the Network Connectivity Tab of this guide.
3.
On the Settings List, verify that "SMB" is enabled. Also, verify that TCP/IP is enabled as one of the
supported protocols (NetBEUI may also be displayed). To enable "SMB," if required, follow the
procedure stated under the Microsoft (NetBIOS over IP) item of the NOS Selection menu, accessed
from the Network Connectivity Tab of this guide.
4.
The Workstation Print Driver Installation Procedures below ASSUME that you have already Set Up an
NT Server to Queue Jobs to the Printer. If you have NOT already set up the NT Server, for a quick-
step set up procedure, refer to the instructions supplied under the selection "Microsoft (NetBIOS over
IP)," located in the NOS Selection menu, under the Network Connectivity Tab of this guide.
Quick Find Printer Driver Installation for:
Windows 95/98/Me Workstation
Windows NT4 Workstation
Windows 2000 & XP Professional Workstation
Windows 95/98/Me Workstation Print Driver Installation
Verify that the Correct Protocols and Services are installed in the workstation
1.
At the Workstation's Desktop, right-click the Network Neighborhood icon ("My Network Places" in
Windows Me) and select Properties.
2.
On the Configuration Tab, verify that Client for Microsoft Networks is installed. If it is NOT, click the
Add button, select Client, select Add, select Client for Microsoft Networks, and click OK. If the setup
program fails to find the required files, you will have to click Have Disk... to load the client from the
Operating System installer disk for this workstation.
3.
On the Configuration Tab, verify that the TCP/IP protocol is installed. If it is NOT, click the Add button,
select Protocol, select Add, select TCP/IP Protocol, and click OK. If the setup program fails to find the
required files, you will have to click Have Disk... to load the protocol from the Operating System
installer disk for this workstation.
4.
Click the Identification Tab and verify that this workstation has a UNIQUE Computer Name (15
characters maximum) and is a member of a workgroup (Workgroup is the default Windows workgroup
name).
5.
Click the Configuration Tab and select (highlight) the TCP/IP Protocol. Click the Properties button
and select the NetBIOS Tab. Verify that the checkbox labeled "I want to enable NetBIOS over TCP/IP"