Xerox WorkCentre M24 System Administrator Manual page 31

Microsoft (NetBEUI) Networks
screen to have the printer reboot and enable your SMB setting.
Configuring Workgroup Name or Printer Name with Internet Services
1.
Open your Web browser and enter the TCP/IP address of the Printer in the Address or Location field.
Press Enter.
2.
Click the Properties button or Tab.
3.
Click the plus symbol (+) to the left of the Protocol Settings file folder.
4.
Select SMB in the directory tree
5.
The available selections include:
A text box indicating Workgroup name.
A text box indicating the SMB Host name.
A text box indicating the Administrator name.
A text box indicating the Administrator Password.
A text box confirming the Administrator password.
An entry box for the maximum number of connections allowed, labeled Maximum
Sessions.
A TBCP Filter checkbox (displayed when PostScript is enabled).
An enabling checkbox for Auto Driver Download, enabling the Printer to push a driver to
a client.
An enabling checkbox for supporting Unicode (supplying the Host name and Workgroup
name in Unicode characters during SMB transmission).
An enabling checkbox for Auto Master Mode. An enabling checkbox for Encrypt
Password (during SMB transmission).
6.
Accept the default value, or enter a value from 3 to 10, for maximum number of connections allowed in
Maximum Sessions.
7.
Accept the Workgroup name shown, or enter in your own workgroup name.
8.
Type the SMB Host Name or accept the name shown.
9.
Enter in the appropriate Administrator name and password if desired (such as for password-protected
access in a NetBEUI workgroup).
10.
Click the Apply New Settings button, then click the Reboot button to reboot the printer and apply
setting changes.