Xerox WorkCentre XL2120 User Manual page 19

1 2
10
6
3 4 5 7
8. Display Window: Copy quantity, reduction/enlargement
settings, and status codes appear in this area.
9. Quantity Keys: Select up to 100 copies. Press the 1 key to
increase the quantity by one. Press the 10 key to increase
the quantity by 10.
To display the number of copies requested during the copy
run press the 10 key.
Press the Clear key to clear the selected quantity.
10. WorkCentre Diagram: Helps you locate areas that require
your attention. The indicators will flash in the area requiring
attention. For additional information refer to the
Solving section.
11. Paper Supply Selection (XL2130f/XL2140df): Press to
change the selected paper supply. The selected paper
supply location will be indicated by a green light on the
WorkCentre diagram.
12. ADF Misfeed Indicator: This indicator will light when a
misfeed occurs in the Automatic Document Feeder.
13. On-line/Off-line Key: Press this button to alternate
between On-line and Off-line status. When the light is lit, the
printer is On-line.
14. Ready Indicator: When the light is ON (not flashing), the
WorkCentre is ready to make copies. When the light is
flashing after the Start key is pressed, the WorkCentre is
warming up and the copy cycle will begin automatically.
15. Start: Press this key to begin copying.
The display will change to 1 and increases by 1 as each
copy is made.
16. Clear/Stop: Press this key to stop the WorkCentre while
making copies or to clear copy quantity. If the key is
pressed twice quickly, all programming will be cleared.
8 9 10 11 12 13 14 15 16
Problem