Xerox WorkCentre XL2120 User Manual page 39

30
Feature
Default Image Quality: This
feature allows you to select the
default Image Quality mode.
Auto Contrast Adjustment:
The copy contrast range may be
adjusted when the copy image is
consistently too light or too dark
in the Auto Image Quality mode.
Paper Trail Edge Deletion: The
trail edge deletion can be turned
Off to accommodate originals
that have print to the very bottom
edge. When Off, another 4 mm
will copy, however the image
quality may deteriorate as it gets
closer to the bottom edge.
When this feature is On each
time the paper tray is opened
edge deletion is disabled for the
first copy. Edge deletion is
enabled for the following copies.
Paper Tray Bypass Auto Start:
When enabled, the copier will
begin to copy as soon as paper
is fed into the paper tray bypass.
(XL2120 / XL2130f.)
Automatic Document Feeder
Auto Start: When enabled, the
ADF will begin to copy as soon
as paper is placed in the ADF.
(XL2140df.)
Reduction/Enlargement
Preset: This feature allows you
to set a specific preset reduction
or enlargement setting for the
key.
Program Option Number
Number * Factory Setting
5 0 – Auto Exposure*
1 – Text
2 – Photo
6 0 – Lightest
1 – Lighter
2 – Normal *
3 – Darker
4 – Darkest
7 0 – On *
1 – Off
8 0 – On *
1 – Off
9 0 – On
1 – Off*
10 50 – 200%
Default 50% *