Toner Cartridge Replacement - Xerox WorkCentre XL2120 User Manual

36
– E-1, E-2, E-3, E-4, E-5
3. If not accessible, turn the knob in the direction of the arrow
to move the paper to the exit area.
4. Gently pull the paper out through the exit area.
5. Close the Front Cover and Side Cover.

Toner Cartridge Replacement

Note: Yield is approximately 4000 copies at 5%area coverage.
When loading or printing the toner indicator on the
WorkCentre diagram will light when the toner supply is low.
Approximately 10 more copies can be made, but you should
have a replacement cartridge in stock. When the J1 status
code is displayed, the machine will stop operating until the
toner cartridge is replaced.
Note: Replacement toner cartridge yield approximately 4K
copies at 5% coverage.
Note: Ensure that the Alternate Paper Tray is lowered
(XL2140df).
1. Press the Release Latch to open the Side Cover.
2. Press the Front Cover Release Button, located on the top
left side of the Front Cover, to open the Front Cover.
3. Press down on the green lever on the front of the old Toner
Cartridge and pull the cartridge out.
Note: Help the environment by recycling your used toner
cartridge. Refer to the recycling brochure packed with the Toner
Cartridge for details on Xerox's Green World Alliance Recycling
Program.
(continued)