Transport, Inspection And Storage; Transport; Inspection Of Delivery; Storing The Equipment - Munters M120 User Manual

3 Transport, inspection and storage

3.1 Transport

Figure 3.1 Handles
If possible, use a pallet loader to move the dehumidifier. Use the two handles in the casing to lift it (see
8.3, Technical data for weight data.)
Use the original packaging when shipping the unit.

3.2 Inspection of delivery

1. Inspect the delivery and compare with the delivery note, order confirmation or other delivery
documentation. Make sure that everything is included and nothing is damaged.
2. Contact Munters immediately if the delivery is not complete in order to avoid installation delays.
3. If the unit is to be put into storage prior to installation, see section Storing the equipment.
4. Remove all packaging material from the unit, and make sure that no damage has occurred during
transportation.
5. Any visible damage must be reported in writing to Munters within 5 days and prior to installation of
the unit.
6. Dispose of the packaging material according to local regulations.

3.3 Storing the equipment

Follow these instructions if the dehumidifier is to be stored prior to installation:
Place the dehumidifier in an upright position on a horizontal surface.
■
Re-use the packaging material to provide protection for the unit.
■
Protect the dehumidifier from physical damage.
■
Store the dehumidifier under cover and protect it from dust, frost, rain and aggressive contaminants.
■
5
Transport, inspection and storage
M120
190TGB-1008-H1402