Transport, Delivery Inspection And Storage; Transport; Delivery Inspection - Munters ComDry M210X User Manual

Table of Contents

4. Transport, delivery inspection and storage

Transport the dehumidifier by carrying it by its handle or in the original packaging.

The unit must always be placed in an upright position during transport. Failure to comply with this can

cause the unit to malfunction.

The power cable should be rolled up and placed under the handle or under the rubber strap on the

front.

Rolled up power cable

• Do an inspection of the delivery and compare with the delivery note, order confirmation or other deliv-

ery documentation. Make sure that everything is included and nothing is damaged.

• Contact Munters immediately if the delivery is not complete or damaged in order to avoid installation

delays.

• Any damage to the packaging must be documented with photos before the packaging is removed.

• Remove all packaging material from the unit, and make sure that no damage has been made during

transportation.

• Any damage to the unit must be documented with photos.

• Any visible damage must be reported in writing to Munters within 3 days and prior to installation of the

unit.

• Discard the packaging material according to local regulations.

ComDry M210X Dehumidifier

Table of Contents