Table of Contents
Advertisement
3 Transport, inspection and storage
3.1 Transport
Use the handles when lifting the unit.
Use the original packaging when shipping the unit.
Figure 3.1 Handles
3.2 Packaging and delivery inspection
1. Inspect the delivery and compare with the delivery note, order confirmation or other delivery
documentation. Make sure that everything is included and nothing is damaged.
2. Contact Munters immediately if the delivery is not complete in order to avoid installation delays.
3. If the unit is to be put into storage prior to installation, see section Storing the equipment.
4. Remove all packaging material from the unit, and make sure that no damage has occurred during
transportation.
5. Any visible damage must be reported in writing to Munters within 5 days and prior to installation of
the unit.
6. Dispose of the packaging material according to local regulations.
3.3 Storing the equipment
Follow these instructions if the dehumidifier is to be stored prior to installation:
Place the dehumidifier in an upright position on a horizontal surface.
■
Re-use the packaging material to provide protection for the unit.
■
Protect the dehumidifier from physical damage.
■
Store the dehumidifier under cover and protect it from dust, frost, rain and aggressive contaminants.
■
5
Transport, inspection and storage
MG50 & MG90
190TGB-1004–N1402
Advertisement
Table of Contents
