Operational Features; The Printer's Startup Page - Xerox Phaser 7700 Advanced Features And Troubleshooting Manual
Xerox phaser 7700: user guide
Hide thumbs
Also See for Phaser 7700:
- Service manual (379 pages) ,
- User manual (108 pages) ,
- Install manual (42 pages)
Table of Contents
Advertisement
Printer Management
Operational features
The printer's Startup Page
By default, the printer produces a Startup Page each time the printer is turned on or reset.
If desired, you can disable the Startup Page.
There are three methods for turning on/turning off the Startup Page:
From the printer's front panel
I
Using CentreWare IS Printer Management software
I
Using utility files
I
To turn on/turn off the Startup Page from the printer's front panel:
1.
With
highlighted, press the OK key.
Menus
2.
Scroll to the
Printer Setup
3.
Press the OK key.
4.
Scroll to the
Startup
5.
To change the setting, press the OK key.
To turn on/turn off the Startup Page using CentreWare IS Printer Management software:
1.
From your printer's Internet Services home page, click Properties.
2.
On the left side of the Properties page in CentreWare IS, click Printer Defaults.
3.
If desired, change the setting for Print Startup Page (under User Preferences on the
Printer Defaults page).
4.
Click the Save Changes button on the bottom of the page.
To turn on/turn off the Startup Page using utility files:
Macintosh: Use the Apple Printer Utility (refer to page 40 for instructions).
I
PC: Download one of the following utility files, as described on page 41:
I
STARTPG.PS — turn on the Startup Page
I
NOSTRTPG.PS — turn off the Startup Page
I
32
Menu, by pressing the Up Arrow or Down Arrow key.
Page, by pressing the Up Arrow or Down Arrow key.
Phaser 7700 Color Printer
Advertisement
Table of Contents
