Sysstart Job Execution; Sys/Start Job Execution; Front Panel Intensity; Front Panel Contrast - Xerox Phaser 7700 Advanced Features And Troubleshooting Manual

Printer Management

SysStart Job execution

A startup file (SysStart) is automatically run when you turn on or reset the printer. The
Japanese, Chinese and Korean fonts are loaded from the Phaser hard drive when this file is
executed. To customize the startup, use UsrStart.
Note
If the SysStart file contains an error, the printer ignores the remainder of the file
and may not start up as expected.

Front panel intensity

To make the front panel text more readable, you can adjust the intensity of the front
panel's back lighting:
1. On the front panel, with
2. Scroll to
Printer Setup Menu
3. Press the OK key.
4. Scroll to
Set Front Panel Intensity
key.
5. Press the OK key.
6. Scroll until the desired back light intensity is displayed. The intensity values range
from 0 (no back light) to 10 (brightest back light).
7. Press the OK key.

Front panel contrast

To make the front panel text more readable, you can adjust the contrast between the text
and the background:
1. On the front panel, with
2. Scroll to the
Printer Setup Menu
3. Press the OK key.
4. Scroll to
Set Front Panel Contrast
key.
5. Press the OK key.
6. Scroll the value until you achieve the desired contrast between the text and the
background. The values range from 1 to 10.
7. Press the OK key.

Intelligent Ready mode

Intelligent Ready mode is an automated system that monitors the printer's usage and
warms up the printer when you are most likely to need it.
34
highlighted, press the OK key.
Menus
by pressing the Up Arrow or Down Arrow key.
by pressing the Up Arrow or Down Arrow
highlighted, press the OK key.
Menus
by pressing the Up Arrow or Down Arrow key.
by pressing the Up Arrow or Down Arrow
Phaser 7700 Color Printer