Advanced Printing Features For Phaser 750 Printers; Previewing With 1St Page Preview - Tektronix Phaser 750DP User Manual

Advanced Printing Features for Phaser 750 Printers

Advanced Printing Features for
Phaser 750 Printers

Previewing with 1st Page Preview

When printing multiple pages through the driver (either multiple copies of a single page or
a multiple-page file), select 1st Page Preview to preview the first page of the job before
proceeding with the remainder of the job; this feature is useful when printing a large job.
You can set the timeout in the printer's front panel (timeout is the amount of time the
printer waits after sending the first page of a file before it continues with the remainder of
the job). The default timeout is 5 minutes.
Requirements
P, DP or DX Feature Set
Turn on the feature in the printer driver
Use 1st Page Preview
1.
In a supported driver, select 1st Page Preview:
LaserWriter 8.3.4 driver:
In the Print dialog box, click Options.
LaserWriter 8.6 driver:
In the Print dialog box, from the pull-down menu (General) select Printer
Specific Options.
Windows 95 / Windows 98 PostScript driver:
Start/Settings/Printers, then select Properties for your printer. In the Setup tab,
select Expert Options.
Windows 2000 driver:
From the Layout tab or Paper/Quality tab, click Advanced.
Windows NT driver:
Under the Properties tab, select the Advanced tab. In the Document Options tab,
select Printer features.
Adobe PS3 driver for Windows 3.1:
Select the Features tab options.
2.
Check your first print. At the printer's front panel 1st Page Preview message, choose
one of these options:
Reprint: Reprints the first page, pauses for the duration of timeout or until you
press a button.
Cancel: Cancels the print job.
Continue: Prints the rest of the print job.
3.
Press Select.
32 Phaser 750 Color Printer