Paper Handling Settings - Xerox Phaser 4510 Advanced Features Manual

Paper Handling Settings

This section includes:
■ Setting Tray 1 Mode and Tray 2-N Mode
■ Setting the Duration of the Tray 1 Prompt or the Tray 2-N Prompt
■ Changing the Load Paper Timeout
■ Changing the Load Paper Timeout
■ Setting the Default Paper Destination
■ Selecting the Default for Offsetting Output
Setting Tray 1 Mode and Tray 2-N Mode
The Tray 1 Mode and Tray 2-N Mode setting define the printer's media handling behavior to
better fit the kind of printing you want to do. Two modes determine how paper size and type
are set for Tray 1 and for Trays 2-N, and which tray is used if you do not select a specific tray:
Dynamic The dynamic setting prompts the printer to search the trays to find the paper
size and type to match your print job. If no size and type matches are found
(Factory default for
and the media size and type have not been configured at the printer's control
Tray 1 Mode)
panel, the printer will print from the highest priority unconfigured tray and set
the paper type and size from the print job. The default tray priority is Tray 2, 3,
4, and then 1.
Static The static setting enables the user to select the paper size and type settings
for the trays using the Paper Tray Setup menu option on the printer's control
(Factory default for
panel. To print from a tray, the paper size and type of your print job must match
Tray 2-N Mode)
the tray's paper size and type settings on the control panel.
To select the tray mode setting, use one of the following options:
■ The printer's control panel
■ CentreWare IS
Using the Control Panel
To select a Tray 1 Mode or Tray 2-N Mode setting on the control panel:
1. Select
Paper Tray Setup
2. Select
Tray 1 Mode
3. Select the appropriate setting, and then press the OK button.
Using CentreWare IS
To select a Tray 1 Mode or Tray 2-N Mode setting using CentreWare IS:
1.
Launch your web browser.
2.
Enter the printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the General folder on the left navigation panel, and then select Printer Defaults.
on page 4-10
on page 4-12
on page 4-12
on page 4-13
on page 4-14
, and then press the OK button.
or , and then press the OK button.
Tray 2-N Mode
Phaser® 4510 Laser Printer
4-10
Printer Settings
on page 4-11