Printer Settings
This section includes:
■
Printer Control Settings
Paper Handling Settings
■
Printer Control Settings
This section includes:
■
Setting the Control Panel Language
■
Setting Control Panel Accessibility Behavior
■
Setting the Printer Date and Time
■
Controlling Startup Page Printing
■
Changing the Power Saver Timeout
■
Setting the Timing of the Low Toner Warning
■
Controlling Print Density
■
Controlling Print Quantity
■
Controlling Printing with Low Toner
Setting the Control Panel Language
To select the control panel language, use one of the following options:
■
The printer's control panel
■
CentreWare IS
Using the Control Panel
To select the default language on the control panel:
1.
Select
Printer Setup
2.
Select
Control Panel Setup
3.
Select
, and then press the OK button.
Language
4.
Select the desired language, and then press the OK button.
Using CentreWare IS
To change the default control panel language using CentreWare IS:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the General folder on the left navigation panel, and then select Printer Defaults.
5.
Select the language from the Set Control Panel Language drop-down list.
6.
Click the Save Changes button at the bottom of the screen.
on page 4-2
on page 4-10
on page 4-2
on page 4-4
on page 4-5
on page 4-6
on page 4-8
on page 4-8
on page 4-9
, and then press the OK button.
, and then press the OK button.
Phaser® 4510 Laser Printer
4-2
on page 4-3
on page 4-7
Printer Settings