Paper Handling Settings - Xerox Phaser 8560 Advanced Features Manual

Paper Handling Settings

This section includes:
Selecting Tray 1 Mode
■
■ Selecting Tray 2–N Mode
■ Setting the Duration for the Tray 1 Prompt
■ Changing the Load Paper Timeout
Selecting Tray 1 Mode
The Tray 1 Mode setting specifies:
■ How Tray 1 paper type and size are determined when you load paper in the tray but do not
select the paper type and size on the control panel.
■ When Tray 1 is used for print jobs.
Setting
Dynamic
(Factory default setting)
Static
Automatic
To select the Tray 1 mode setting, use one of the following options:
■ The printer's control panel
CentreWare IS
■
on page 4-9
on page 4-10
on page 4-12
on page 4-13
Description
Uses the settings from the next print job that prints from Tray 1 to
■
determine the paper size and type.
Printer will print from Tray 1 when specified in the print job or when no
■
other tray has the job's requested paper size and type.
The paper size and type already set for Tray 1 stay in effect.
■
Printer will print from Tray 1 when specified in the print job or when no
■
other tray has the job's requested paper size and type.
Uses the settings from the next print job that prints from Tray 1 to
■
determine the paper size and type.
Printer will print from Tray 1 when paper is loaded, unless a different
■
tray is specified in the printer driver.
Phaser® 8560/8860 Printer
4-9
Printer Settings