Paper Handling Settings
This section includes:
■
Selecting Tray 1 (MPT) Mode
■
Setting the Duration for the Tray 1 (MPT) Prompt
■
Setting the Duration for the Tray 2–5 Prompt
Changing the Load Paper Timeout
■
■
Setting the Default Paper Destination
■
Selecting the Default for Offsetting Output
■
Setting the Default Stapling Option
Setting the Default Punch Option
■
Selecting Tray 1 (MPT) Mode
The Tray 1 (MPT) Mode setting specifies:
How Tray 1 (MPT) paper type and size are determined when you load paper in the tray but
■
do not select the paper type and size on the control panel.
■
When Tray 1 (MPT) is used for print jobs.
Setting
Dynamic
(Factory default setting)
Static
Automatic
To select the Tray 1 (MPT) mode setting, use one of the following options:
■
The printer's control panel
■
CentreWare IS
on page 4-9
on page 4-12
on page 4-13
on page 4-14
on page 4-15
on page 4-16
on page 4-17
Description
Uses the settings from the next print job that prints from Tray 1 (MPT)
■
to determine the paper size and type.
Printer will print from Tray 1 (MPT) when specified in the print job or
■
when no other tray has the job's requested paper size and type.
The paper size and type already set for Tray 1 (MPT) stay in effect.
■
Printer will print from Tray 1 (MPT) when specified in the print job or
■
when no other tray has the job's requested paper size and type.
Uses the settings from the next print job that prints from Tray 1 (MPT)
■
to determine the paper size and type.
Printer will print from Tray 1 (MPT) when paper is loaded, unless a
■
different tray is specified in the printer driver.
Phaser® 7760 Color Laser Printer
4-9
Printer Settings
on page 4-11