Xerox Phaser 4510 Advanced Features Manual page 52

Setting the Timing of the Low Toner Warning
The printer detects when toner is running low and displays a warning message on the control
panel. You can set the supply level at which the warning message first appears based on the
approximate number of remaining pages that can be printed with each item. The default is 500
remaining pages.
To set timing for the Low Toner Warning message, use one of the following options:
■ The printer's control panel
CentreWare IS
■
Using the Control Panel
To select the timing for the Low Toner Warning message on the control panel:
1. Select
Printer Setup
2.
Select
Printer Controls
3. Select
Low Toner Warning Level
4.
Press the or
Up Arrow
OK button.
Note: The value can be adjusted in increments of 500 pages.
Using CentreWare IS
To select the timing for the Low Toner Warning message using CentreWare IS:
1. Launch your web browser.
2. Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Select the General folder on the left navigation panel, and then select Printer Defaults.
5.
Select a value on the Low Toner Warning drop-down list to change the setting.
6. Click the Save Changes button at the bottom of the screen.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
button to select the desired value, and then press the
Down Arrow
Phaser® 4510 Laser Printer
4-7
Printer Settings