The Print Quality Of Transparencies Is Poor - Xerox DocuPrint XJ6C User Manual

The print quality of transparencies is poor

Cause
Transparency is not selected for
the Media option on the Main
property page.
The document was printed on the
wrong side of the transparency
film.
The wrong brand of
transparencies was used.
Multiple transparencies are
stacked in the paper output shelf.
Xerox DocuPrint XJ6C Ink Jet Printer
Suggested Solution
Make sure Transparency is the
selected Media option on the
Main property page. If the
problem continues, select the
Page Setup command from the
application you're using to open
the Main property page and
select the Transparency option.
Remove the transparencies from
the paper tray, turn the sheets
over, and reinstall the sheets in
the tray. The rough side of the
film should face the back of the
printer.
Use transparencies made for ink
jet printers only.
When printing multiple
transparencies, remove each
transparency from the paper
output shelf after it's printed.
35