Poor Transparency Print Quality - Xerox Phaser 7760 User Manual

Poor Transparency Print Quality

Problem
Print-quality defects are occurring on the transparency film:
■ Light and/or dark spots.
■ Smeared toner
■ Light bands on the print
Caution: Damage caused by using unsupported paper, transparencies, and other specialty
media is not covered by the Xerox warranty, service agreement, or Total Satisfaction
Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada.
Coverage may vary outside these areas; please contact your local representative for details.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/supplies.
Solution
1. Using non-recommended transparency film can cause print-quality problems or damage
the printer's fuser. See the Recommended Media List at www.xerox.com/paper.
2. Verify that the paper is properly loaded in the tray, and that
paper type in the
Paper Tray Setup
menu. See Loading Paper
Phaser® 7760 Color Laser Printer
4-13
Solving Print-Quality Problems
is the selected
Transparency
on page 3-9.