The Printed Document Is Blank; The Document Prints Slowly - Xerox DocuPrint XJ6C User Manual

The printed document is blank

Cause
There may be a problem with the
print head, printer cable, or your
PC.

The document prints slowly

Cause
The Print Quality is set to High
quality.
ImageFix is selected.
Xerox DocuPrint XJ6C Ink Jet Printer
Suggested Solution
Print a Demo print (press and
hold the Resume/FF button on
the printer's control panel for 2
to 5 seconds).
If the Demo print is good, check
the printer cable or your PC.
If the Demo print is blank, do
one or more of the following:
Remove, then reinstall the
print head.
Press the Cartridge
Change/Clean button for 2 to
5 seconds to clean and restore
the print head. Repeat the
process, if necessary.
Contact the Xerox Customer
Support Center.
Suggested Solution
On the Main property page, set
the Print quality to Draft or
Normal.
On the Advanced property page,
click ImageFix to remove the
check mark.
27