The Print Quality Of Transparencies Is Poor - Xerox DocuPrint C6 User Manual

The print quality of transparencies is poor

Cause
The wrong type of transparencies
was used.
Transparency is not selected for
the Paper type option on the
Paper/Output property page.
The document was printed on the
wrong side of the transparency
film.
Multiple transparencies are
stacked in the paper output shelf.
58
Suggested Solution
Use transparencies made for ink
jet printers only.
Make sure Transparency is the
selected Paper type option on
the Paper/Output property page.
If the problem continues, select
the Page Setup command from
the application that you are using
to open the Paper/Output
property page, and select the
Transparency option located in
Paper type.
Remove the transparencies from
the paper tray, turn the sheets
over, and reinstall the sheets in
the tray. Refer to the instructions
for the transparency to see which
side is the printable side.
When printing multiple
transparencies, remove each
transparency from the paper
output shelf after it has been
printed.