Preparation And Unpacking - Xerox DocuPrint N24 Quick Installation

Preparation and Unpacking

1
Power OFF the printer.
2
Disconnect the printer GFI power cord.
3
Unpack and remove the finisher from its
box according to the instructions on the
finisher box. Be sure to slide it off the
bottom of the box.
CAUTION: This operation should be
done by two people.
Remove any tape and packing material.
Save the carton and packing materials
for later use in case you ever need to
ship the finisher back to Xerox.
4
Unpack the installation kit. You should
have these three items:
(1) Transport Cover and thumb screw
(2) Emissions Bracket Assembly and two
thumb screws
(3) Guide Rail with docking brackets.
(4) Staple Cartridge
Q u i c k I n s t a l l a t i o n / R e m o v a l G u i d e 3