Xerox DocuPrint N24 Quick Installation page 4

Install the Transport Cover
4 X e r o x D o c u P r i n t N 2 4 , N 3 2 , a n d N 4 0 F i n i s h e r
1
Face the front of the printer and place the
Transport Cover on the top left side of the
printer. Make sure the lip on the bottom
right side of the transport cover is placed
under the connecting edge of the printer.
If your printer has the Duplex Module
installed, you do not need to remove
it in order to install the Transport
Cover.
2
Align the tabs on the Transport Cover with
the appropriate slots on the edge of the
printer as shown.
Then gently pull the Transport Cover
towards the left edge of the printer until it
snaps into place.
3
Make sure the black switch interlock is
exposed and parallel to the floor as shown.