Xerox DocuPrint N2025 User Manual page 152

Solving Print Quality Problems
Table 5.3 Print Quality Problems (continued)
Problem
Unfused or partially
fused image
The printed image is not
fully fused to the paper
and easily rubs off.
Wrinkled prints
Prints are wrinkled,
creased, or torn.
5-36 User Guide
Possible Cause(s)
Damp paper stock.
Heavy or unusual paper stock.
Defective Fuser.
Poor paper condition.
Paper is damp.
Paper debris in path.
Paper skew.
Fuser is at its end of life
Corrective Action(s)
Replace paper stock.
Use only approved paper/media. (See
Table 2.1 on page 2-4).
Replace the Fuser. See the System
Administrator Guide on the Product CD for
ordering and installation instructions.
Inspect/replace the paper stock.
Replace paper stock.
Clear paper path.
Check paper tray guides.
Replace the Fuser. See the System
Administrator Guide on the Product CD for
ordering and installation instructions.
Table 5.3 Page 6 of 8