A3/Ledger Size Tray - Xerox DocuPrint N2025 User Manual

Loading Paper
2-10 User Guide

A3/Ledger Size Tray

1 Remove the tray from the printer and place it on a flat
surface.
To remove the tray from the printer, pull it out
until it stops, then gently remove it from the
printer while lifting it up.
If you are replenishing paper of the same size, there is no
need to adjust the tray's length and width guides. You can
therefore skip those steps that call for these adjustments.
2
Remove the tray cover.
3 Gently squeeze the length guide, lift it up and slide it all
the way out.
4 Gently squeeze the side guides and slide them all the way
out.