1
Simplex orientation
2
Duplex orientation
If the tray's metal base plate remains raised, press it down
5
to lock it.
6
Align the four corners of the paper stack and insert it into
the tray with the side to be printed on facing up (see
illustration, below, for orientation of letterhead,
transparencies and drilled paper. Make sure the paper is
placed at the center of the tray, under the retaining clips
on both sides.
To reduce the possibility of misfeeds and jams,
especially when using special stock, fan the stack
of paper before inserting it into the tray.
1
Chapter 2: Loading Print Media
Loading Paper
2
2-11