Tone Configuration And Converter Settings - T+A R 2500 R User Manual

Tone configuration and converter settings

Balance This menu point is used to alter the balance in level between the left and right chan-
nels, e.g. to compensate for non-symmetrical loudspeaker positioning. The balance
can be adjusted in increments of 1 dB (85 steps); the screen always displays the
current value.
Loudness The R 2500 R is equipped with a volume-dependent tone control (LOUDNESS) circuit,
which compensates for the frequency-dependent sensitivity of the human ear at very
low volume levels, due to the characteristics of aural physiology.
This menu point is used to switch the loudness circuit on and off.
Loudness level
This menu point is used to adjust Loudness to suit the loudspeakers and the listening
room.
Tone control
This menu point can be used to disable (by-pass) the R 2500 R's tone controls.
To switch off the tone controls, select the "OFF" setting. When the tone controls are
switched off, any adjustments you make to the following menu points "BASS" and
"TREBLE" have no effect.
Treble
In this menu item treble can be set in the range of -6...0...+8 dB.
Bass
In this menu item bass can be set in the range of -6...0...+8 dB.
25