Function Buttons; Range; Replacing The Battery - T+A R 2500 R User Manual

Function buttons

Adds a favorite to the Presets list
In the system configuration menu: Activates a source
Removes a favorite from the Presets list.
In the system configuration menu: Deactivates a source
FM Radio: Button for switching between Stereo and Mono reception.
The Stereo setting is constantly displayed in the screen window by a  symbol.
The Mono setting is constantly displayed in the screen window by a
Calls up the search function for SCL, USB-Media, Internetradio, Podcasts and Music services.
Activates the sort function within a Favourites list.
Displays the Favourites list created on the R 2500 R
Cycles through the various screen displays.
Detailed display with / without CD text / Radiotext (if present) and large display with / without CD
text / Radiotext (if present).
*Buttons not described in this chapter are not required for operating the R 2500 R.

Range

When operating by remote control, please hold the SRC2 in the
direction of the remote control receiver (located next to the
volume knob).
The range of the remote control is approx. 5..6 m.
The line of sight between SRC2 and the remote control receiver
must not be interrupted by obstacles.
The direct incidence of interfering light (e.g. from fluorescent
and energy-saving lamps) into the receiver should be avoided
at all times, as otherwise the range of the remote control can be
considerably reduced.

Replacing the battery

To replace empty batteries, remove the entire back of the SRC2 by sliding it downwards (1) and remove it
completely as shown below (2). Insert three new cells of the LR 03 (MICRO) type, taking care to maintain
correct polarity as shown. Please note that you must always replace all the cells.
20
symbol.