System Configuration - T+A R 2500 R User Manual

System configuration

Source Under this menu item you can disable not used sources, and assign a plain text name to
each source which is in use; this name then appears in the screen displays.
configuration
You can also assign a plain text name for the display to the external sources (digital in-
puts and Bluetooth).
When this menu item is called up with the OK button, a list of all sources of the R 2500 R
appears.
Each source is followed by the displayed plain text name or the note Enabled for an
active source or Disabled if the source is deactivated.
Disable not required sources
Pressing the
To activate a disabled source, press the
Change the source name
To change the plain text name, first select the corresponding source and press the OK
button.
Delete the previous name by repeatedly pressing the cursor left button.
Now use the alpha-numeric keypad of the SRC2 to change the name as required, then
confirm your choice with OK; this saves the settings for that source. Alternatively the
App (T+A MusicNavigator G3) can be used to change the name.
To switch between numeric and alphanumeric input as well as upper/lower case, press
the Aa button.
If you should wish to restore the factory default source name, erase the whole name
before saving the empty field with the cursor left button: this action resets the display
to the standard source names.
Passthrough
If you wish to connect a device with its own volume control (e.g. TV set or sur-
round decoder), this menu point can be used to disable the volume control of the
R 2500 R for the analog inputs (Analog IN 1-3 /pass-through mode).
You should only select this setting if a device with its own volume control is connected
j
to the unit. Ensure that the volume of the source device is turned down to zero before
connecting it to the R 2500 R, otherwise the speakers connected to it may be damaged
through overloading.
Trigger
The R 2500 R offers the option to be switched on and off remotely using a trigger
signal (switching voltage, +5 ... +20V). Many external surround decoders are
designed to deliver the required trigger output signal. The R 2500 R can be swit-
ched on and off in parallel with the decoder, and at the same time to select the
appropriate source and the correct volume level. The active Trigger function is
displayed on-screen next to the selected source by means of the "TRG" sym-
bol. If you wish to use this function, activate the Trigger function and select the
appropriate source.
button on the SRC2 deactivates the selected source.
button briefly.
23