Front Panel Controls And Connections - T+A K 6 CV User Manual

Front panel controls and connections

 
 
Primary switch
The K6 is normally switched on and off using the 
button on the remote control handset.
The K6 also features a primary switch (rocker switch)
located on the left under the front panel. Operating the
primary switch completely disconnects the K6 from the
mains supply, e.g. if you know you will be absent for a
protracted period. The On and Off settings of the switch
are marked on the rocker.
To use the machine you must first switch it on at the
primary switch; it can then be switched on and off using
the    button on the remote control handset. 
Notes
If you switch off the K6 at the primary switch, it still re-
tains all the settings you have made. The integral clock
continues to run for about two days.
If the K6 is left switched off for a fairly long period the
clock has to be re-set (manually, or automatically by
RDS: see Section 1 'The tuner as alarm clock'). The
alarm function and the loop-through function for AV pro-
gramme material (set-top box, video recorder) to the TV
set are not available if the unit is turned off at the primary
switch.
Operation
 
 
Emergency buttons
To the right of the primary switch on the underside of the
  
K6 you will find three small buttons which can be used to
control the machine in an emergency. These buttons can
be used to operate the essential functions directly.
Press the left Select button to choose the function to be
controlled, then use the two right buttons to alter the
setting. The integral screen always displays the function
which can be changed at any time:
VOLUME VOLUME VOLUME VOLUME
SURND MODE SURND MODE SURND MODE SURND MODE
SOURCE SOURCE SOURCE SOURCE
STOP PLAY STOP PLAY STOP PLAY STOP PLAY
PREV NEXT PREV NEXT PREV NEXT PREV NEXT
ALARM off ALARM off ALARM off ALARM off
STdBY OFF STdBY OFF
STdBY OFF STdBY OFF
Note
To leave the emergency control system simply wait for
about 5 seconds after pressing the buttons.
4

 
Select Change
button button
Volume setting
Select the decoder mode
Select the program source
Stop / Start CD/DVD playback
Skip track/title (disc mode)
Switch program (tuner mode)
Switch alarm function OFF/ON
Switch unit to stand-by /
switch unit off