Other Locations - Space Requirements - Xerox DocuPrint 75 Installation Planning Manual

Installation

Other locations - space requirements

4-6
If you cannot use the standard location, it is recommended that
you place all of the controller equipment on a table. When you
use a table, be sure to place the CPU on the side of the table
that is closest to the printer.
The location of all controller components on a table to the left of
the printer is shown in
Figure 4-7. Ultra 10/Ultra 30 all controller components on a
table to the left of the printer
Figure 4-8. SunBlade 150 all controller components on a
table to the left of the printer
If necessary, you can place all controller components on a table
to the right of the printer as shown in
10.
Installation Planning Guide
Figure 4-7. and Figure 4-8.
Figure 4-9.
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
and Figure 4-