Paper Trays (Trays 1-4) - Xerox DocuPrint 75 Installation Planning Manual

Installation Planning Guide

Paper trays (trays 1-4)

DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Figure 5-3. Printer components
Tray 5 - Bypass
Tray
Tray 6 -
High
Capacity
Feeder
The main components of the printer are shown in
The following information sources are provided to assist you:
• Power-on/power-off indicator is on the top front of the
printer. It glows green when on and emits no light when off.
• Labels are affixed at the points of need throughout the
system. They depict information about loading the paper
stock.
• Green or Gold colored areas act as markers.
– Gold colored areas typically indicate the handle or levers
to push or pull when removing Replaceable Modules or
Cartridges.
– Green colored areas are where you clear jams.
The Paper Trays hold up to 500 sheets of 20 lb. (75 gsm) stock
each. You can adjust the trays to hold many sizes of paper, from
5.5 x 8.5 inches (140 x 216 mm) up to 11 x 17 inches (279 x 432
mm or A3). To handle 12 x 18 inch paper, a tray must be
specially set up. If you wish to dedicate a tray permanently to
handle this size paper please contact the Xerox Welcome
Center.
Product overview
Top Tray
Stacker
Finisher
Trays 1 - 4
Figure 5-3.
5-3