Technical Data - Milwaukee M18 BSBT Original Instructions Manual

TECHNICAL DATA

Type
Production code
Battery voltage
No-load speed mode max.
Torque max. (2.0 Ah)
Tool reception
Bolt adjustment range
Weight according EPTA-Procedure 01/2014 (2.0 Ah... 12.0 Ah)
Weight according EPTA-Procedure 01/2014 (2.0 Ah... 12.0 Ah)
& System Attachment Fork 33 - 52 mm
Weight according EPTA-Procedure 01/2014 (2.0 Ah... 12.0 Ah)
& System Attachment Fork 58 - 69 mm
Recommended ambient operating temperature
Recommended battery types
Recommended charger
Noise Information
Measured values determined according to EN 62841.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Wear ear protectors.
Vibration Information
Total vibration values (vector sum in the three axes) determined
according to EN 62841.
Vibration emission value a
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test
given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for diff erent
applications, with diff erent accessories or poorly maintained, the vibration and noise emission may diff er. This may signifi cantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
WARNING Read all safety warnings, instructions,
illustrations and specifi cations provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SHEAR BOLT TOOL SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the
operator an electric shock.
The operator of this device must be instructed in the specifi c
dangers associated with using this device and in the essential
safety measures before working with it for the fi rst time and at
least once a year thereafter.
The operating company must:
• make the operating manual available to the operator and
• ensure that the operator has read and understood it.
Use protective equipment. Always wear goggles when using the
device. The use of protective clothing is recommended, such as
dust mask, protective gloves, sturdy non-slip footwear, helmet
and ear defenders.
Only use devices, battery packs and chargers that are in perfect
technical condition.
24
/ Uncertainty K
h
Have damage repared immediately by an authorised workshop.
To avoid injury and damage, prevent accidental starting of the
device.
Remove any setting tools and wrenches before the operation.
Do not work on electrically live parts. Device is NOT insulated.
Compliance with the specifi ed service work and service intervals
is mandatory.
Only use the Milwaukee forks and sockets supplied with the tool.
Only use connectors that match the size and shape of the
cables.
Screw in the screws until they shear off . Do not leave any screws
protruding from the connector.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Switch the device off immediately if stalls! Do not switch the
device on again while the insertion tool is stalled, as doing
so could trigger a sudden recoil with a high reactive force.
Determine why the insertion tool stalled and rectify this, paying
heed to the safety instructions.
The possible causes may be:
• it is tilted in the workpiece to be machined
• the power tool is overloaded
Do not reach into the machine while it is running.
ENGLISH
M18 BSBT
Cordless shear bolt tool
4872 90 01 XXXXXX MJJJJ
18 V
0–60 min
-1
100 Nm
1/2 " (12,7 mm)
ø 19 mm - ø 78 mm
2,9 - 4,0 kg
3,3 - 4,4 kg
3,3 - 4,4 kg
-18...+50 °C
M18B...; M18HB
M12-18...; M1418C6
75,0 / 3 dB(A)
83,0 dB(A) / 3 dB(A)
0,8 m/s / 1,5 m/s
2 2