Technical Data - Milwaukee HEAVY DUTY M12 BLROT User Manual

TECHNICAL DATA

Type
Voltage
Rated speed (RPM)
Collet diameter
Max abrasive grinding body diameter
Max cutting disc diameter
Max grinding disc diameter
Max wiring brush diameter
Weight according EPTA-Procedure 01/2014 (2.0 - 6.0 Ah)
Recommended ambient operating temperature
Recommended battery types
Recommended charger
Noise information
Noise emission values determined according to EN 60745
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Always wear ear protectors.
Vibration information
Total vibration values (vector sum in the three axes) determined according to EN 60745
Vibration emission value a
h
Uncertainty K
WARNING!
The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in
accordance with a standardised test and may be used to compare one tool with another. They may be used for a preliminary assessment of
exposure.
The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for diff erent
applications, used with diff erent accessories, or poorly maintained, the vibration and noise emission may diff er. These conditions may
signifi cantly increase the exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned off or when it is
running idle. These conditions may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration and noise, such as maintaining the tool and the
accessories, keeping the hands warm (in case of vibration), and organising work patterns.
WARNING! Read all safety warnings, instructions,
illustrations and specifi cations provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fi re, and/or serious injury.
Save all warnings and instructions for future reference.
ROTARY TOOL SAFETY WARNINGS
SAFETY WARNINGS COMMON FOR GRINDING, SANDING,
WIRE BRUSHING, OR ABRASIVE CUTTING-OFF
OPERATIONS
SAFETY WARNINGS COMMON FOR GRINDING
This power tool is intended to function as a grinder, sander,
wire brush, polisher, carving or cut-off tool.
Do not use accessories which are not specifically designed
and recommended by the tool manufacturer. Just because the
accessory can be attached to your power tool, it does not assure
safe operation.
18
The rated speed of the accessory must be at least equal to the
maximum speed marked on the power tool. Accessories running
faster than their rated speed can break and fly apart.
The outside diameter and the thickness of your accessory must
be within the capacity rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded or controlled.
The arbour size of wheels, sanding drum or any other
accessory must properly fit the spindle or collet of the power
tool. Accessories that do not match the mounting hardware of the
power tool will run out of balance, vibrate excessively and may
cause loss of control.
Mandrel mounted wheels, sanding drums, cutters or other
accessories must be fully inserted into the collet or chuck. The
"overhang" or the length of the mandrel from the wheel to the
collet must be minimal. If the mandrel is insufficiently held and/
or the overhang of the wheel is too long, the mounted wheel may
become loose and ejected at high velocity.
Do not use a damaged accessory. Before each use inspect
ENGLISH
M12 BLROT
Rotary tool
12 V
5000 - 27500 /min
0.8 / 1.6 / 2.4 / 3.2 mm
Ø 25 mm
Ø 38 mm
Ø 20 mm
Ø 20 mm
0.562 kg - 0.8 kg
-18 – +50 °C
M12B... M12 HB...
C12C..., M12-18...
75.5 dB (A)
3 dB (A)
83.5 dB (A)
3 dB (A)
12.49 m/s 2
1.5 m/s
2