Advertisement
TECHNICAL DATA
Type
Battery voltage
Cycle rate
Collation angle
Fastener type
Diameter
Min/Max length
Magazine capacity (number of nails)
Weight according EPTA-Procedure 01/2014 (2.0 Ah - 6.0 Ah)
Recommended ambient operating temperature
Recommended battery types
Recommended charger
Noise information
Noise emission values determined according to EN 60745
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Always wear ear protectors.
Vibration information
Total vibration values (vector sum in the three axes) determined according to EN 60745
Vibration emission value a
h
Uncertainty K
WARNING!
The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in
accordance with a standardised test and may be used to compare one tool with another. They may be used for a preliminary assessment of
exposure.
The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for diff erent
applications, used with diff erent accessories, or poorly maintained, the vibration and noise emission may diff er. These conditions may
signifi cantly increase the exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned off or when it is
running idle. These conditions may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration and noise, such as maintaining the tool and the
accessories, keeping the hands warm (in case of vibration), and organising work patterns.
WARNING! Read all safety warnings, instructions,
illustrations and specifi cations provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fi re, and/or serious injury.
Save all warnings and instructions for future reference.
CORDLESS NAILER SAFETY WARNINGS
Always assume that the tool contains fasteners. Careless
handling of the nailer can result in unexpected fi ring of fasteners and
personal injury.
Do not point the tool towards yourself or anyone nearby.
Unexpected triggering will discharge the fastener causing an injury.
Do not actuate the tool unless the tool is placed fi rmly against
the workpiece. If the tool is not in contact with the workpiece, the
fastener may be defl ected away from your target.
26
Disconnect the tool from the power source when the fastener
jams in the tool. While removing a jammed fastener, the nailer may
be accidentally activated if it is plugged in.
Use caution while removing a jammed fastener. The mechanism
may be under compression and the fastener may be forcefully
discharged while attempting to free a jammed condition.
Do not use this nailer for fastening electrical cables. It is
not designed for electric cable installation and may damage the
insulation of electric cables thereby causing electric shock or fi re
hazards.
Wear ear protectors. Exposure to noise can cause hearing loss.
Hold power tool by insulated gripping surfaces, when
performing an operation where the nail may contact hidden
wiring. Nails contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an electric shock.
ENGLISH
M12 FCN18GS
Cordless nailer
12 V
2/sec
0°
Brad style
1.2 mm (18 Ga)
15 mm – 38 mm
110
2.1 kg - 2.4 kg
-18 – +50 °C
M12B... M12 HB...
C12C..., M12-18...
81.4 dB (A)
3 dB (A)
92.4 dB (A)
3 dB (A)
1.52 m/s
2
1.5 m/s
2
Advertisement
