Page 1
OPERATOR'S MANUAL Cat. No. M18 FHP M18 FUEL™ 28 MM SDS PLUS ROTARY HAMMER WITH ONE-KEY™ WARNING To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL • Do not overreach. Keep proper footing and balance at all times. This enables better control SAFETY WARNINGS of the power tool in unexpected situations. Read all safety warnings, instruc- WARNING • Dress properly. Do not wear loose clothing or tions, illustrations and specifica- jewellery.
Page 3
Tool or a trained professional for MILWAUKEE ® their life must collected additional information or training. separately returned • Maintain labels and nameplates. These carry environmentally compatible recycling important information. If unreadable or missing, facility. contact a MILWAUKEE service facility for a ® replacement.
SPECIFICATIONS Be sure that the shank of the bit is clean. Dirt particles may cause the bit to line up improperly. Do not use Cat. No............. M18 FHP bits larger than the maximum recommended capacity Volts............18V DC of the drill because gear damage or motor overload- Battery Type ..........
Position the tool, grasp the handles firmly and pull Rotary Hammers have three MILWAUKEE the trigger. Always hold the tool securely using both ® settings: rotation only, rotary hammer, and hammer handles to maintain control. This tool has been de- only.
/ milwaukeetool.co.nz or of parts, or any other condition that may affect the contact a distributor. tool operation. Return the tool, battery pack, and charger to a MILWAUKEE service facility for ® repair. After six months to one year, depending on...
Page 8
Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M18 FHP and is the answer not in the manual?
Questions and answers