System Dependencies And Prerequisites; Configuration Guide; Productivity Guide - GBC DocuColor 6060 Planning Manual

GBC Fusion Punch II with Offset and Bypass Stacker

System Dependencies and Prerequisites

Configuration Guide

Printer Configurations
TRAY 1-2
TRAY 3-4 TRAY 1-2

Productivity Guide

Listed below are the dependencies and prerequisites for
installing the Fusion Punch II.
•
An Enhanced High Capacity Stacker is required for in-line
connectivity to the printer. .
•
A DFA Enablement Kit (675K11272) is required to connect
the FPII with the Xerox DocuColor 6060 / 7000 / 8000.
•
A Feeding & Finishing Interface Unit kit (FFIU kit
497K02331) is required to connect the FPII with the Xerox
DocuColor 6060 / 7000 / 8000.
The Configuration Guide contains diagrams over the various
Finishing Solutions that are available.
IOT EHCS /
HCS80
IOT EHCS /
HCS80
The Fusion Punch II does not require skip pitches and does not
affect the base printers output speed.
5-2
Finisher Configurations
FPII OFFSET
STACKER
FPII BYPASS OFFSET
STACKER STACKER