Table of Contents
Advertisement
GBC Fusion Punch II with Offset and Bypass Stacker
4. Xerox Nuvera™ 100 / 120 Digital Production System
Performance Specifications
Punch / Stacker
Paper Size / Weight
Stacker Capacity
Input Heights
Limitations
Listed below are the Performance Specifications for the Fusion
Punch II.
Specifications
Paper Size: 7" x 10" (178 x 254 mm) – 11" x 17" (279 x 432 mm) / A3
Paper Weight: 16 lbs (60 gsm) – 110 lbs index, 250 gsm (12 pt.)
Stacker 2,500 sheets
34" (860 mm) and 40.2" (1021 mm)
•
A Finisher Transport Module is required for in-line
connectivity to the printer.
•
A Xerox Document Stacker 5000 is recommended for
stacking paper weights greater than 203 gsm and sizes
smaller than 8.5" x 11" (216 x 279 mm) or larger than 11" x
17" (279 x 432 mm).
•
Punching is limited to 7" x 10" (178x 254 mm) size up to 8.5"
x 11" / A4, long edge only including tabs and 11" x 17" / (279
mm x 432mm) / A3 can by punched short edge only.
•
Clear covers and acetates are not supported.
•
Depending on media characteristics, 11" x 17" / (279 mm x
432mm) / A3 may have stacking limitations.
4-1
Advertisement
Table of Contents
