GBC Fusion Punch II with Offset and Bypass Stacker
System Dependencies and Prerequisites
Configuration Guide
Printer Configurations
IOT
INTERPOSER
*
- The following inline devices are available:
•
BDFx
•
Book Factory
•
Book Factory with Gateway
•
SQFBM
Productivity Guide
Listed below are the dependencies and prerequisites for
installing the Fusion Punch II.
•
The DT6180 must be equipped with a Bypass Transport to
enable In-line Finishing.
The Configuration Guide contains diagrams over the various
Finishing Solutions that are available.
Finisher Configurations
BYPASS
FPII
DS5000
DS5000
DS5000
FPII
DS5000
DS5000
DS5000
The Fusion Punch II does not require skip pitches and does not
affect the base printers output speed.
2-2
OFFSET
FPII
BYPASS
STACKER
STACKER
FPII
OFFSET
DS5000
STACKER
DS5000
FPII
OFFSET
STACKER
DS5000
FPII
BYPASS
OFFSET
STACKER
STACKER
BYPASS
INLINE
FPII
STACKER
*
DEVICE
FPII
BYPASS
INLINE
STACKER
*
DEVICE
DS5000
FPII
BYPASS
STACKER
DS5000
FPII
BYPASS
BYPASS
STACKER
STACKER
OFFSET
STACKER
FPII
BYPASS
OFFSET
STACKER
STACKER
BYPASS
BYPASS
INLINE
STACKER
STACKER
DEVICE
INLINE
*
DEVICE
INLINE
*
DEVICE
*